Hiland 2023 85

Basic Info.

Model NO.	TM5301
Channel	Nothing
Receive Frequency	433.92MHz
Transmission Rate	10~20Kbps
Frequency	433.92MHz/318MHz/315MHz
Working Voltage	85-265V AC
Loading Capacity 110V AC	185watts
Loading Capacity 220V AC	375watts
Code	Rolling Code
Transmitter Stored	30
Weight	83G/PC
Transport Package	Box
Specification	25*27.5*150mm
Trademark	Hiland
Origin	China
Production Capacity	10000

Packaging & Delivery

Package Size 3.00cm * 3.00cm * 16.00cm Package Gross Weight 0.100kg

Product Description

SpecificationI. Specification
Code: Rolling code
Transmitter stored: 30PCS
Weight:83g/pcs
Size:25*27.5*150mm
Working voltage:85-265V AC
Working frequency: 433.92MHz/318MHz/315MHz
3 button control

II. Safety Instruction

1. For security, please read the instructions carefully before initial operation; making sure that the power is off before connection.
2. The received signal may be interfered by other communication devices. (e.g. the wireless control system with the same frequency range)
3. It is forbidden to control the high-risk coefficient equipment / system. (e.g. cranes)
4. It should be applied in dry indoor place or in the electric appliance place.

III. Set Up

1. Learning / memorizing transmitters: Press the learning button on the panel,LED turns into red and gets into learning state;press the same button twice on the same transmitter,LED blinks for a while and turns into green shows transmitter has been learned successfully.
2. Erasing Transmitter:Continue pressing the learning button (about 8s) until LED turns green then release the learning button, LED turns red (about 1s) then turns green. It indicates that the erasing process is successful.

IV. Operational process

5.1 Three button control system with transmitter Button 1,2,3 in transmitter is in correspondence with open, close and stop.
5.2 Single button control system Press-Open(motor works clockwise), press-stop, press-close(motor works anti clockwise),press-stop,and so on in a loop.Single- button control is only effective to the learned button; if a new button of transmitter learned into the control panel, the former one is useless. (e.g.: if learned button 1at first, and then button 2or 3, the former button 1becomes invalid).
5.3 Infrared sensor protection It only work when door closing. Motor stops after 1 second and reverse when photocell signal disconnecting during door closing. (External photocell PHOTO port connects photocell normally close switch)

Our ExhibitionCompany profilePackaging And Logistics
FAQ
1. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.What can you buy from us?
Transmitter,Tubular Motor Receiver,Sliding Gate Opener,Garage Door Opener,Photocell
3. Why should you buy from us not from other suppliers?
Hiland is professional designer and qualified manufacturer of the automatic door control systems.We have 15 years experience We
have sliding/garage/swing/rolling shutter opener and control systems,transmitters,receivers,photocell,flash lamp,keypad etc.
Q4.How can i get a price of needed garage door opener?
A: Please give the exactly size and quantity of your required door. We can give you a detail quotation based on your requirements.
Q5.We want to be your agent of our area. How to apply for this?
A: Please send your ideal and your profile to any e-mails of us .Let's talk more.